2017 Acura NSX

High mounting and component stiffness minimize lost motion to help realize high steering accuracy and faithful road feedback. Steering assist levels are modified with the Integrated Dynamics System in concert with the MR dampers to provide appropriate effort and road feel for the desired level of performance.

Aerodynamic Balance & High Speed Stability

NSX’s body shape was effectively designed to minimize aerodynamic drag while creating specifically balanced front-to-rear downforce through a total airflow management approach that focuses on utilizing airflow through each vent, while extracting maximum energy from the airflow field to cool the brakes and power unit.

Extensive research and development revealed that placing approximately three times as much downforce at the rear of the vehicle relative to the front of the car provides the optimal downforce balance for high-performance driving as well as everyday functionality.

Sport Hybrid Super Handling All-Wheel Drive

Sport Hybrid SH-AWD is a further evolution of Acura’s highly regarded Super-Handling All-Wheel Drive (SH-AWD) system in vehicles like the Acura TLX sports sedan and MDX sport-utility vehicle. This pinnacle new system electrifies the torque vectoring ability and provides this capacity to all drivers in all driving conditions.

The NSX’s revolutionary Sport Hybrid SH-AWD uses torque vectoring-enhanced vehicle dynamics-and specifically direct yaw control-to ultimate advantage by utilizing the instantaneous and “always-on” capacities of its electric motors to directly create a yaw moment at any speed, under power, and in off-throttle driving maneuvers-with greater immediacy and precision.

Supported by the advanced yaw-control capabilities of Sport Hybrid SH-AWD, the NSX driver is able to execute super-precise line tracing when aiming for the apex out on the track or on a favorite winding road. What’s more, the driver can do so with superb vehicle stability as well as a low workload, thus expanding the capabilities of all drivers, ranging from novice clubman to professional racer in virtually any driving scenario.

When accelerating the system provides instantaneous torque response via its three electric motors-the Direct Drive Motor and front Twin Motor Unit.

While braking, the Acura NSX employs both its muscular mechanical braking system and its regenerative braking capabilities to deliver powerful, precise and virtually fade-free brake performance with very natural and progressive pedal feel while also recapturing kinetic energy to charge the system’s lithium-ion hybrid battery.

When cornering, the NSX’s Twin Motor Unit and Vehicle Stability Assist (VSA) work cooperatively to enhance cornering precision (line traceability). If desired, VSA can be disabled by simply selecting the Track mode setting of the Integrated Dynamics System, and then holding the VSA “Off” button, located on a panel to the left of the steering wheel, for at least six seconds.

By taking advantage of the immediate high-torque response of the system’s three electric motors to heighten control, the Acura NSX Sport Hybrid SH-AWD system elevates any driver’s confidence and performance driving capabilities while extracting more performance from the car than is possible with conventional methods.

Next-Gen Supercar Power

At the heart of any supercar lies a powerful and responsive powertrain. The 2017 NSX raises the game by making its tremendous power instantly accessible and finely controllable.

Primary power is supplied by the twin-turbo 3.5-liter V6 engine, with peak engine output of 500 hp and 406 lb.-ft. of torque at the driver’s disposal. Broad power and torque bands mean that this massive motive force is available when the driver really wants it. Dual electric waste gates help manage boost regulation for smooth throttle transitions.

The new Acura NSX’s 9-speed dual clutch transmission also plays a crucial role. Lightning-fast up and downshifts delivered seamlessly make the NSX a joy to drive-the faster the better. The wide total ratio range coupled with closely spaced individual ratios supports maximum extraction of the twin-turbo V6 power. And the transmission programming selects the right gear at the right time, or lets drivers select as they wish.

But the real secret to the NSX’s virtually zero-delay acceleration lies in the seamless integration of the instant and substantial torque from the front TMU and Direct Drive Motor. This right now electric power pushes the NSX’s total output to 573 hp and allows fine adjustment of power for maximum performance-on the street or track.

Importantly, the NSX’s control systems manage the collective system power and torque smoothly while allowing scintillating response and acceleration. Responses can also be progressively quickened via Integrated Dynamics System settings.

Launch Mode Control

For ultimate, high-G acceleration from the standstill, the Acura NSX driver can invoke Launch Mode Control. With the 9-speed DCT set in either Drive (“D”) or Manual (“M”) and the Integrated Dynamics System set to “Track” mode, the driver depresses the brake pedal with the left foot while simultaneously pushing the accelerator pedal all the way to the floor with the right foot. When the brake pedal is released, the NSX will perform a perfectly executed launch that utilizes peak power from the TMU, twin-turbocharged V-6 engine and Direct Drive Motor.

Super Sports Brakes

Seamlessly integrating both mechanical (friction) brakes with electro-servo control and a regenerative brake system, the NSX provides exceptionally precise, linear and virtually fade-free braking performance in almost any driving condition. To support the driver in high-speed driving scenarios as well as at low-speeds, the powerful brake system has been painstakingly tuned for easy, predictable modulation in any condition.

The Brembo mono block brake calipers have been designed with high rigidity to provide even pressure distribution and superior pedal feel. Ultra-high performance and lightweight carbon ceramic brake rotors are available as a factory-installed option. Both the carbon ceramic and the standard iron rotors use a two-piece floating design to maintain consistent stopping power under severe braking.

Dialing Up Dynamic Pleasure: The Integrated Dynamics System

The NSX Integrated Dynamics System provides the driver with four selectable dynamic modes-Quiet, Sport, Sport+ and Track. The system integrates all of the vehicle’s dynamic chassis and powertrain systems-steering, brakes, throttle, vehicle stability assist, magnetorheological dampers, engine, transmission, and Sport Hybrid SH-AWD control systems. From the available all-electric operation of Quiet mode to the closed circuit, maximum performance capacities of Track mode, the Integrated Dynamics System progressively dials up the dynamic characteristics of the vehicle based on the needs of the driver and the driving environment.

In addition to dynamic system variations, the Integrated Dynamics System varies cabin sounds via Active Exhaust Valve and Intake Sound Control to fine-tune sound quality and volume to match the dynamic character of the vehicle in Quiet, Sport, Sport+ and Track modes. Notably, there is a full 25 dB sound level difference between Quiet and Track modes-a tremendous variance in audible sensation.

The NSX Integrated Dynamics System also has the world’s first custom setting menu that allows the driver to configure the vehicle’s mode for startup. For example, drivers can program the car to always start in Quiet, or Sport mode, along with the ability to schedule the NSX to operate exclusively in Quiet mode during a specified time period, such as the early morning to avoid waking the neighborhood.

Integrated Dynamics System mode characteristics:

• Quiet Mode – Quiet mode prioritizes electric-only driving at lower speeds, maximizing energy efficiency and minimizing both cabin and exterior noise. The vehicle uses the TMU for initial launch from a standstill. When power demand requires the engine, it starts more quietly than in other modes and maximum engine speed is limited to 4,000 rpm, while the Active Exhaust and Intake Sound Control valves are closed for a more hushed operation. The transmission shift map also prioritizes lower engine speeds. The driver interface (tachometer and center console information display screen) features a cool and quiet blue color.
• Sport Mode – Sport mode takes advantage of the Sport Hybrid system to offer the driver a direct responsive vehicle or a more relaxed vehicle according to their driving inputs. Compared to Quiet Mode, it eliminates the 4,000 rpm limit on the engine and quickens throttle response. A more aggressive transmission shift map holds gears longer and allows higher rpm shift points. The Intake Sound Control system and the Active Exhaust Valve are activated, allowing additional intake and exhaust sound to permeate the cabin for a more emotional driving experience. Like Quiet mode, Sport mode provides idle stop function. The Sport mode is the default setting in normal vehicle operation.
• Sport+ Mode – Sport+ further prioritizes drivetrain response and dynamic performance with faster up- and down-shifts of the 9 DCT and still more aggressive throttle mapping. Maximum use of the electric motor torque provides more explosive acceleration. Increased agility is achieved by harmonizing a more aggressive Direct Yaw Control setting that works in concert with the magnetorheological dampers, Agile Handling Assist, and the Electric Power Steering system-perfect for a spirited drive on a winding road. It also transmits a higher degree of steering feedback, while intake and exhaust note sounds are further increased for an even more exhilarating driving experience. The TFT Meter sports an aggressive yellow “con-trail” along the tachometer needle supporting easy recognition of engine RPM. Red highlights for the center console information display also reinforce that the driver is in now in Sport+ mode.
• Track Mode
  • Optimized for circuit driving, Track mode invokes the most aggressive settings and parameters to assist the driver in capturing the fastest and most consistent lap times possible, along with maximum acceleration from a standstill when utilizing Launch Mode Control. The braking system offers enhanced performance-oriented pedal feel. Up/down gearshift execution of the DCT and performance of the Super Hybrid SH-AWD and active driver aids (VSA, AHA) are programmed to support circuit limit driving, and an even greater amount of engine intake sound permeates the cabin for a heightened driving experience offering enhanced driver feedback even when wearing a helmet.
  • Track mode also prioritizes the lithium-ion battery state-of-charge to maintain a consistent level of torque delivery and direct yaw moment from the three electric motors.

Of note, the VSA operation is progressively “loosened” from the Integrated Dynamics System Quiet mode up to Track mode, enabling an increasingly higher degree of freedom for the driver in exploring the dynamic capabilities of the Acura NSX. In “Track” mode, the VSA system can also be completely disabled by the driver.

Anatomy of a Turn

To better understand the dynamic functioning of the Sport Hybrid SH-AWD powertrain and all its related systems-including the V-6 engine, Rear Direct Drive Motor, mechanical and regenerative braking systems, front-mounted Twin Motor Unit and IPU (hybrid battery).

Design Concept

The exterior design of the all-new 2017 Acura NSX reflects the integration of exotic supercar aesthetics and exceptional supercar performance. The “Interwoven Dynamic” overarching design theme for the exterior architecture epitomizes the concept of “form following function,” as every character line, body panel shape or crease, air flow inlet/outlet, and even the vehicle’s overall proportions have been designed to create a New Sports eXperience. Accordingly, each aspect of the NSX’s exterior architecture has been optimized to support the dynamic capabilities of the NSX while advancing Acura design into the future.

Exterior Styling

Every square inch of the Acura NSX’s exterior body panel surfaces, fluid shapes, air inlets/exhaust outlets and even the positioning/shaping/thickness of the floating C-pillars serves a distinct purpose-one that has been carefully calculated through thousands of hours of complex computational fluid dynamics (CFD) in combination with extensive wind tunnel testing in the company’s advanced facilities in the United States and in Japan.

“The idea that form follows function is fundamental to Acura design, and this philosophy is interwoven in the core of NSX, which is why our exterior concept is called “Interwoven Dynamic,” said Michelle Christensen, exterior design project leader in the Los Angeles based Acura Design Studio. “The NSX is a visual expression of beautiful design and performance working together, influencing every decision we made-every surface, every millimeter, every design element of the new NSX is focused on enhancing performance.”

From the acutely angled slope of the chiseled aluminum hood to the rakishly shaped Acura Jewel Eye™ LED headlights and tapered front grille, the front is supercar sleek. The distinctive headlights are bisected by massive mesh-covered air inlets from below and the front fenders are highlighted by a sharply creased character line running all the way from the grille towards thinly sculpted A-pillars.

Remarkably compact overhangs, fore and aft, foretell the design and engineering team’s exemplary packaging of mechanical and electrical components, while the vehicle’s overall sleek yet muscular stance conveys a sense of purpose and power. The hood line, roofline, floating C-pillars and rear quarter appear as one distinctive and unified curve. The massive yet lightweight high- performance wheel and tire package fit within the arching wheel wells with minimal gap and perfect proportion.

The rear of the vehicle is equally striking, highlighted by the signature floating C-Pillars, which cascade gently from the roofline to just forward of the integrated spoiler at the trailing edge of the rear deck lid, flanking an expansive glass panel that reveals the twin-turbocharged V-6 engine.

Further accentuating the exterior architecture of the new Acura NSX are a choice of eight paint schemes, each color in the rich palette carefully selected and engineered to accentuate the exterior’s bold design while ushering in a new level of paint quality within the supercar segment.

Floating C-Pillars

The floating C-pillars integrated into the exterior architecture of the all-new NSX are as purposeful as they are distinctive, supporting efficient body-side airflow. The C-pillars extend outward from the sloping rear roofline so that, as air flows down the sides of the vehicle, it is efficiently rerouted into the side-mounted engine air intakes. The floating C-pillars also aid engine cooling by creating a negative pressure zone around the rear heat exhaust vents, along the outside edges of the rear windscreen, improving the efficiency of hot air exhaustion. The portion of air that flows down the side of the vehicle toward the outside section of the buttress is conditioned to reduce turbulence as it passes with minimal disruption over the rear fender and spoiler.

Door Handles & Trunk Access

The flush-fitting exterior door handles are both aesthetically pleasing and functional, providing a welcoming “handshake” with the driver/passenger as they extend outward from the door upon approach while at the same time supporting clean airflow along the body side.

Smart Entry with keyless access is enabled by both proximity sensors, tied to the remote key fob, and capacitive touch sensors in the exterior door handles. A proximity sensor actuates the door handles upon approach, extending them outward for easy operation. Grasping either door handle activates a capacitive touch sensor, which initiates door unlocking. Once the driver/passenger releases the handle, it returns to the flush position. The doors can also be unlocked using the remote key fob-a single push of the unlock button extends the driver’s door handle and simultaneously unlocks the driver’s door, while a double push of the button extends both door handles and unlocks both doors.

Upon exiting the vehicle, the driver/passenger can lock the vehicle by simply touching a button positioned just forward of the handle or by depressing the lock button on the remote key fob.

The exterior door handle mechanism is both a mechanical and electrically operated system. As is the case with an electronically operated system on a vehicle such as an EV, the driver/passenger can sometimes be locked out of the vehicle due to an onboard power failure; this is impossible with the NSX thanks to a redundant mechanical system that allows the driver/passenger to manually operate the door handle without electrical assistance. Automatic door handle extension can be disabled by a switch in the glove box for shipping or long-term storage.

The trunk is accessed by means of the remote key fob, by a button located on the driver’s interior door panel, or by a button discretely located under the trailing edge of the trunk lid. In the event of a loss of power, both the driver’s door and the trunk also feature a traditional key cylinder for manual locking/unlocking of the doors and trunk.

Supercar Wiper/Washer system

The wiper/washer system, engineered specifically for the new NSX, has been designed to operate effectively even at maximum vehicle speeds. Tested in the wind tunnel at airflow equivalent of over 180 mph, the spoiler-shaped wiper blades generate downforce on the wiper blade, while the speed-controlled wiper motor maintains a constant wiping speed, ensuring effective wiper performance in all driving conditions. Likewise, the windshield washer system utilizes a three-nozzle system for superior coverage in all conditions and driving environments, including high-speed travel.

In a further nod to improving forward visibility and providing an unobstructed view of the road, the windshield wiper arms are placed as low as possible at the base of the windshield/lower cowl section so that they remain completely out of the driver’s view when not in operation. Placing the wipers below the hood also helps mitigate wind noise.

Door Mirrors

Featuring a two-tone paint scheme that accentuates the Acura NSX’s low-slung look and wide stance, the door mirrors include a thin blade arm to minimize air turbulence as air flows along the side of the vehicle. This reduces local airflow noise, prevents disruption of air flowing to the side intakes, and minimizes aerodynamic drag. And like the ultra-high-strength A-pillars, the thin blade arm design improves visibility when parking and cornering. Each mirror housing includes an LED turn signal.

LED Lighting
The exterior design of the 2017 NSX features a variety of light-emitting diode (LED) lighting, including Acura Jewel Eye™ LED headlights, LED daytime running lights (DRL), and LED taillights.

Acura Jewel Eye LED Headlights

Acura Jewel Eye LED headlights are a standard feature on every NSX. Designed to complement the aggressive low and wide exterior appearance, each headlight assembly contains six individual LEDs, with the four outer LEDs in operation when using the low beam setting, and all six at work when the high beams are activated.

Acura Jewel Eye LEDs provide superior down-the-road illumination with outstanding light distribution and light characteristics and a wavelength close to the human eye’s luminosity curve. With their lower electrical power consumption, the NSX’s Jewel Eye LED headlights also have a longer operational life compared to traditional halogen or high-intensity discharge (HID) lamps.

LED Daytime Running Lights (DRL)

Utilizing the top half of each LED headlamp that makes up the Acura Jewel Eye™ LED headlight assembly are the NSX’s LED daytime running lights (DRL). Located just beneath the LED headlamps are the LED position lights, composed of a series of small and tightly packed LEDs that run in a thin continuous line along the bottom of the headlight assembly. LED lighting is also used for the turn signals at both the front and rear of the vehicle.

LED Taillights

Similar in character to the Acura Jewel Eye LED headlights at the front of the vehicle, the LED taillights have a compact and narrow appearance with a uniquely freeform shape. The LED taillight array starts off wider, toward the center portion of the rear of the vehicle, then gently tapers as it wraps around towards the outside corners/rear fender arches.

Exterior Body Construction

The NSX’s multi-material body design concept extends throughout the entire body construction. By employing sheet molding composite (SMC), aluminum stampings and high temperature-resistant plastic in key locations of the body, the NSX design team takes advantage of each material’s unique characteristics to create exterior body panels of the highest finish quality while also minimizing vehicle mass, optimizing weight distribution and center of gravity, and helping to ensure outstanding longevity and durability.

Composite Panels

Used extensively in the construction of high-end exotic cars in key exterior componentry, SMC is a high-grade specialty glass-fiber reinforced polyester, its shape formed while heated under pressure within a compression molding. By utilizing special resins as well as high-strength fiber composite matting, Acura NSX exterior design engineers have developed SMC material for specific applications on the vehicle’s exterior.

Specially engineered SMC material is used in the fender sections at all four corners. Designed to possess high structural rigidity, this unique SMC paneling makes an important contribution to optimizing the NSX’s overall center of mass by minimizing weight at all four corners. The rear trunk skin is also made of lightweight SMC, with structural support provided by a stamped aluminum inner frame structure.

A special, high temperature-resistant plastic is used in the small body panel sections just below the floating C-pillars (forward of the rear fenders) due to the body panels’ close proximity to the turbo intercoolers.

A rigid, structural SMC material has been developed for the NSX’s trunk internal structure. This highly rigid construction allows the trunk structure to serve as a mounting point for the rear fenders and rear bumper for a sturdy and precise fit. An added benefit of the trunk compartment design is that it allows for easy removal when the vehicle is brought into an Acura dealer for service; after removing the rear fascia, the entire trunk structure can be removed for easy access to the engine room. This design also simplifies replacement of the rear section should the NSX be involved in a rear-end collision.

Aluminum Panels

The Acura NSX door skins are made of sheet hydroformed aluminum. Sheet hydroforming is the ideal means to shape the one-piece aluminum panels that make up each door, as the process supports the construction of complex shapes that cannot be formed by conventional stamping techniques. Moreover, the aluminum door skins can be relatively thin and light as they are naturally supported by the inner door structure.

The hood, roof panel and the engine compartment/trunk frame are composed of high-grade stamped aluminum. A carbon fiber roof panel is optional. Like the other composite materials utilized in the exterior, the use of aluminum in these areas offers light weight with excellent structural rigidity and surface quality.

Body Panel Fitment

As the near final step in the vehicle assembly process at the Performance Manufacturing Center, the exterior body panels are attached to the vehicle’s space frame, starting with the roof, then the doors, etc., working from the top down. This process, along with the high degree of dimensional accuracy for the underlying space frame, allows for fine adjustment of panels to achieve consistent and symmetrical panel gaps.

Aerodynamics: A “Total Airflow Management” Approach

To support the NSX’s ambitious performance targets, innovative packaging design and exotic styling, the development team completely reimagined the exterior engineering for this modern supercar so that maximum energy is extracted from the flow of air around and through the NSX with the highest efficiency. This “total airflow management” strategy supports complete power unit cooling and air intake, brake system cooling, and aerodynamic performance-drag and downforce-at a very high level.

Computational fluid dynamics (CFD) was used extensively during development to maximize the performance of the power unit cooling systems: First, for the proof-of-concept in establishing heat management strategy at the earliest development stage; and second, for continuous thermal performance improvement as the vehicle matured through development.

Along with the use of advanced CFD, wind tunnel and real-world testing, the development team employed computerized lap-time simulation models of some of the world’s most legendary proving grounds that could then be run on chassis-dynamometers allowing testing and validation of computer models for thermal management.

Aerodynamic Design Highlights:

• Efficient cooling openings at the front of the vehicle maximize cooling airflow across the key heat exchangers located within the front section (front engine radiators, Twin Motor Unit cooler, condenser, the transmission gear cooler, hybrid Power Distribution Unit).
• Optimized front exit flow paths consider total flow, maximum downforce, low coefficient of drag, and downstream flow structure to feed the engine air intakes.
• Wheel wake management vents work in conjunction with fender vents to stabilize airflow down the side of the vehicle, allowing the air to smoothly enter the signature side intakes for efficient cooling. The air that enters the side intakes is distributed to three areas: engine intake, engine room cooling, and turbo intercoolers.
• Air flowing over the roof and down the rear glass is captured to feed the transmission clutch cooler and introduce engine-room cooling flow.
• Airflow across the rear deck lid works in concert with the taillight slots and rear diffuser to generate significant downforce and effectively manage the air wake generated behind the vehicle. It also minimizes the low-pressure wake coming off the rear of the vehicle and therefore minimizes drag.
• Optimization of front/rear downforce distribution for improved handling and stability
• Rear brake cooling air ducts designed into the hollow sub-frame direct cooling air to the rear brakes using specially tuned air deflectors located on the rear suspension arms.

Supercar Aero

NSX achieves top-class aerodynamic balance and supercar aerodynamic downforce. Aerodynamic drag is minimized, even while moving large airflows through the vehicle to cool the power unit. Aerodynamic downforce is created by utilizing airflow through each vent, as the NSX “exhales,” and through more traditional aerodynamic shape optimization.

The Acura NSX has undergone extensive testing at the company’s state-of-the-art wind tunnel in Raymond, Ohio, using ultra-detailed 40-percent-scale models that replicate the suspension, wheel/tiire, intake and exhaust vents, heat exchangers and major under-hood components. The NSX has also been verified and further refined through testing at full scale in the company’s wind tunnel in Tochigi, Japan and on real and simulated proving grounds throughout the world.

Airflow management vents and precision ducting were tuned to optimize forms with aerodynamicist and designer input during wind tunnel test sessions. A 3-to-1 downforce ratio-placing three times as much downforce at the rear as at the front of the car-provides the optimal balance for high-performance driving as well as everyday functionality.

Six vortices flow at the rear of the NSX, including those that support the highest downforce across the rear deck lid. Air flowing from below the car and exiting through carefully optimized rear diffuser fins is a critical vortex that further anchors NSX to the ground. Uniquely, the fins are not parallel to each other, but are narrower toward the front of the car and wider at the rear. This design amplifies negative pressure, enhancing diffuser efficiency which further maximizes downforce.

Of note, the NSX aerothermal team worked to evaluate thermal loading in racetrack conditions using a chassis dynamometer. In addition to simulating key performance parameters, such as engine speed and braking, the test included varying wind speeds based on real-world track data. Simulations included Sebring International Raceway and Virginia International Raceway, the latter serving as one of the primary development tracks for the new NSX.

NSX Exterior Finish/Paint

The NSX paint team at Acura’s innovative new Performance Manufacturing Center targeted the highest levels of paint quality with reduced environmental impact, consistent with their target of next-generation quality and craftsmanship.

NSX Body Panel Paint Process

Because the Acura NSX’s exterior body panels are not attached to its space frame until the conclusion of the vehicle assembly process, body panels are treated and painted separately from the frame and are finished to an exceptional level of quality and luster by expert technicians at the Acura Performance Manufacturing Center.

• NSX body panels enter the paint process attached to a specially designed fixture that locates the panels in a position and angle similar to how they are oriented once installed on the vehicle.
• All body panels are covered with a high-quality primer coat and, depending upon the specific color application, then receive between five and seven coats of paint. Each layer of colored paint applied to the body panels is allowed to fully cure prior to the next application.
• A high-quality/long-lasting clear coat is then applied.
• To help minimize the potential for “orange peel,” which occurs when the clear coat on vertical body panels is pulled down by gravity during the curing process, the body paint fixture has hinges that allow the vertically oriented body panels-doors and fenders-to be rotated to a near-fully horizontal position during the curing process.
• Once cured, the panels undergo careful inspection in a newly designed inspection booth utilizing high-intensity LED lighting to help associates identify and address even the smallest irregularities.
• Body panels are then hand finished after the first layer of clear coat, and again after the second clear coat.

Interior

A complementary and essential component of the all-new Acura NSX’s New Sports eXperience is its driver-centered interior design, where every element-materials, shapes, technology and layout-are optimized to enhance the driving experience. Exceptional ergonomics, a hallmark of the original NSX, have been further advanced. Moreover, as a pinnacle representation of Acura Precision Crafted Performance, the NSX is designed to provide outstanding comfort, quality and advanced, intuitive technologies, all presented in clean and modern aesthetic.

“The interior of the all-new Acura NSX is highlighted by what we call ‘Interwoven Dynamic’ design,” said Michael Cao, interior project leader. “It combines the best attributes of intuitive, easy-to-use functionality and superior ergonomics with a clean and modern design aesthetic worthy of a next-generation supercar. It’s the ultimate testimony to the beautiful simplicity of form following function.”

Artfully sculpted and ergonomic seats are enhanced with supportive yet comfortable bolstering, firmly yet comfortably supporting the driver and passenger and clarifying the driving experience. Strategically placed console and door padding further elevate the driver and passenger lateral support. Materials such as leather and Alcantara® were carefully selected for the ideal combination of craftsmanship and dynamic driving support.

The driver’s instrument cluster and center console have been designed to enhance the driving experience with intuitive layout and simple operation, creating a “simple sports interface” for the driver.

The next-generation Acura NSX interior also supports the idea of a customizable driving experience, employing a trifecta of advanced sound modulation technologies-Active Sound Control, Intake Sound Control and Active Exhaust Valve-that work in concert with the NSX’s Integrated Dynamics System to deliver a tunable cabin sound experience commensurate with the desires of the driver and the driving environment.

Visibility

To maximize forward visibility, the NSX employs a new technology-three-dimensionally-bent and quenched ultra-high tensile strength steel-to create highly rigid yet very thin A-pillars that offer exceptional strength and roof-crush protection while providing the vehicle’s occupants with a panoramic view of the road ahead.

In addition to the tremendous visibility offered by the streamlined A-pillar construction, the heights of the instrument panel and gauge cluster hood are minimized for enhanced forward visibility.

Interior Illumination

The driver’s gauge cluster and Display Audio touchscreen illuminate upon vehicle entry and progressively brighten to full strength with the start of the Power Unit. The display screen of the driver’s gauge cluster presents rich and brightly colored typeface with information that is easy to read against a black background.

Additional interior lighting includes blue-tinted LED lighting for the foot wells and center console and twin LED map lights located in the overhead console.

Sport Seats

Superbly supportive for spirited driving adventures on the road or track, while offering all-day comfort for the hours in between, the NSX sport seats were developed with exemplary ergonomics.

To maximize support and comfort, the four-way manually adjustable driver and passenger seats include tall bolsters with integrated support structures for improved lateral hold, as well as an appropriate balance of ingress/egress and freedom of shoulder movement. The Alcantara center panels in the seat bottom and seatback enhance lateral grip, while the leather outer surfaces improve ease of ingress/egress.

The seat bottom structure is composed of stamped aluminum for reduced weight. Both the seat and seatback are of sturdy construction to hold the driver/passenger in place and for longevity and crash performance considerations, and the headrest is designed to accommodate a helmet for track outings.

Seating options include four-way power-adjustable heated sport seats with 4-way power lumbar and 2-position memory (driver) in either full leather or leather with Alcantara inserts.

To facilitate ease of ingress and egress, the optional power driver’s seat automatically moves rearward when the ignition is turned off.

Steering Wheel

As the centerpiece of the driver’s tactile and dynamic driving experience, the NSX steering wheel has been painstakingly designed to provide a seamless connection between the car and driver, providing superior grip, comfort and control.

• The interior frame of the steering wheel is composed of magnesium for strength and low mass.
• The leather wrapped outer surface is crafted to be entirely seamless with ergonomically designed shapes for optimum grip, control and comfort.
• The wheel shape optimally supports both nine and three o’clock and ten and two o’clock hand positions and is complemented by extended-length paddle shifters.
• A flattened top section offers improved forward visibility and a flattened bottom enhances driver leg space.
• A manual tilt/telescope steering column is provided.

Steering wheel-mounted controls put critical features and functions at the driver’s fingertips. On the left side are the audio volume wheel and source selection button as well as phone controls; to the right are the Multi-Information Display (MID) controls and cruise control functions.

While leather is standard, hand-wrapped carbon fiber trim for the steering wheel is available as a factory-installed option.

Instrument Panel/Center Console Design

With its contemporary styling and free flowing curves, the NSX instrument panel melds authentic refined materials and surface textures and the easy-to-use and ergonomically designed systems that make up the simple sports interface (driver instrumentation and center console), offering intuitive and stress-free operation and functionality.

Visually, both driver and passenger are treated to a clean and minimalist design aesthetic across the entire instrument panel. Uncluttered with easy access to controls for all primary systems, both the instrument panel and center console feature hand-crafted materials including genuine leather atop the instrument panel, Alcantara across the top of the driver’s gauge cluster hood, with additional Alcantara trimming for the center console and glovebox. Critical surfaces of the console have been fortified with additional padding for optimal knee and elbow comfort and support.

Dynamic Thin-Film Transistor (TFT) Gauge Cluster

Front and center of the instrument panel is an 8.0-inch Dynamic Thin-Film Transistor (TFT) gauge cluster, overlaid with a digital analog tachometer dial that gives the appearance of a traditional tachometer. Within the tachometer is the digital speedometer readout and full-color Multi-Information Display (MID). The TFT center meter is flanked by digital gauges displaying the SH-AWD system motors state of charge/assist (left) and battery state of charge (right), with an analog engine coolant temperature gauge on the left and a fuel gauge to the right.

Multi-Information Display

The customizable Multi-Information Display (MID) displays a wide variety of functions and information and is controlled by a thumb dial on the right side of the steering wheel. The MID also incorporates the Acura Maintenance Minder™ system, which alerts the driver of upcoming maintenance needs via the MID. Should a fault occur, specific warning information will appear on the MID.

MID information categories include:

• Integrated Dynamics System mode
• Elapsed time
• Average speed
• Average fuel economy
• Instant fuel economy
• Estimated fuel range
• Maintenance Minder™
• Tire pressure monitoring system (TPMS)
• Engine oil life
• Engine oil level
• Turn-by-turn navigation (with Technology Package featuring embedded Acura Satellite-Linked Navigation System)
• Turn-by-turn navigation for integrated Apple CarPlay® and Android Auto™

Transmission Information Display

The TFT gauge cluster relays important information to the driver relating to the current state of transmission operation in a clear and concise graphical format, depending on the transmission’s mode of operation:

• Auto – Signals the driver that the car is currently in automatic mode.
• D-Paddle – Signals that although Auto is still selected, the car is in a temporary manual mode, with the driver manually selecting gears via the steering wheel-mounted paddle shifters. The display returns to Auto when manual shift activity stops for a certain period of time.
• Manual – The meter displays only the gear selected (e.g. “3”) when the car is in the fully manual mode.

Integrated Dynamic System Meter Modes

The driver’s center meter is tied into the Integrated Dynamics System to provide a visual compliment to the customizable dynamic and auditory elements of the Acura NSX driving experience.

• In Quiet mode, the meter glows a cool blue
• In Sport mode, the meter takes on a grey hue with red highlights.
• In Sport+ and Track mode, the tachometer adopts a yellow hue with red highlights and the tachometer “rotates” to place the lower and upper RPM limits at the six o’clock and three o’clock positions, respectively.

When driving, as engine speed increases, the outer ring of the tachometer will flash red once the engine speed exceeds 7,000 rpm to alert drivers that they are approaching the 7,500 rpm redline. Also, when a new Integrated Dynamics System mode is selected, the MID displays a graphic representation of Integrated Dynamics System component systems-powertrain, SH-AWD, VSA, suspension and steering.

Push Button Start

Once seated, the driver simply depresses the brake pedal and pushes the Start/Stop button located to the right of the steering wheel to start the vehicle. To start the vehicle in accessory mode without engine startup, the driver can press the Start/Stop button without the depressing the brake pedal. At the conclusion of driving, the driver presses the Start/Stop button again to turn the engine and electrical accessories off.

Center Console Displays and Controls

An integral part of the NSX’s elegantly simple driver interface, the center console contains the Display Audio touchscreen, Dual-Zone Climate Control, the Integrated Dynamics System control knob, three-position heated seat controls, Electronic Gear Selector, Electronic Parking Brake and two storage compartments.

Display Audio System Interface

A 7-inch high-resolution WVGA capacitive Display Audio touchscreen is included as part of the standard equipment package. Access to the audio system controls, telematics and customizable vehicle features is provided through this bright and clear interface.

When the driver first opens the door, the Display Audio touchscreen will illuminate and display a custom NSX animation at vehicle startup. At the conclusion of driving the vehicle, the Display Audio touchscreen, the MID display and instrument lighting will dim progressively into darkness.

Dual-Zone Automatic Climate Control System with Humidity Control and Air Filtration

Every Acura NSX includes a dual-zone automatic climate control system with humidity control and air filtration. The system allows the driver and passenger to pre-select their preferred temperature settings, and then automatically adjusts airflow volume, direction and temperature to maintain a comfortable climate within the vehicle. Push-button defrost helps to clear up fogged or icy windows quickly and conveniently for improved outward visibility.

With its micron air filtration system, the dual-zone automatic climate control system is capable of filtering particulate as small as 0.3 microns. Humidity control further improves the vehicle’s interior air quality and driver/passenger comfort levels by using a sensor within the cabin to detect temperature and moisture levels and regulating airflow to maintain a comfortable humidity level.

Integrated Dynamics System: Dynamic Mode Dial

Located at the base of the instrument panel/center console juncture, the driver can easily reach the large Dynamic Mode dial to make Integrated Dynamics System drive mode changes (Quiet, Sport, Sport+ and Track) without taking their eyes off the road ahead.

Electronic Gear Selector

The Electronic Gear Selector allows the driver to select a vehicle gear setting with the simple touch of a button:

• Park (P) – Pressing the button places the vehicle in Park (indicator light illuminates red)
• Reverse (R) – pulling back engages the Reverse gear (indicator light illuminates green)
• Neutral (N) – pressing the button places the transmission in Neutral (indicator light illuminates red)
• Drive (D/M) – pressing the button puts the vehicle in Drive; pressing again puts the transmission in Manual mode (indicator light turns green)

Electronic Parking Brake (EPB) with Automatic Brake Hold

The Acura NSX adds the convenience of an Electric Parking Brake (EPB), allowing the driver to engage the parking brake by simply pulling on a rocker switch located on the center console.

The parking brake also includes the convenience of Automatic Brake Hold which once activated, can maintain rear brake hold even after the brake pedal has been released. With the driver’s seatbelt on and the vehicle in Drive with a foot on the brake pedal, Automatic Brake Hold can be initiated by pressing the Brake Hold button located near the Electric Parking Brake rocker switch on the center console. A “brake hold” message will appear on the instrument panel to alert the driver that the system is currently activated. The foot can be removed from the brake and the vehicle will remain stationary; pressing down on the throttle pedal will deactivate the brake hold feature and the vehicle will start moving.

Multi-Function Center Console/Interior Storage

The new NSX offers a number of convenient storage areas for both driver and passenger. At the base of the center console is a handy inset console front pocket. An additional storage pocket located along the top of the center console between the seats is designed to accommodate a smart phone.

The center console also includes a roomy rear console storage box that contains a 1.5-amp USB interface port that can sync a smartphone to the Display Audio touchscreen for operation of Apple CarPlay and Android Auto and a phone cord management device located underneath the rubber mat that lines the bottom of the rear storage box.

Additional storage is offered by the glovebox, which also includes a 1.0-amp USB interface port that can be used for audio devices such as MP3 players.

Rear Cargo Area

The rear cargo area of the new NSX is pleasantly spacious and versatile for a mid-engine high-performance supercar. With 4.4 cubic feet of space and 100 lbs. of capacity, the NSX trunk can conveniently accommodate weekend luggage for two, or even a golf bag-all easily accessed through the rear cargo area’s wide opening. A set of four rear cargo area tie-down anchors are included to help secure items placed in back, and an accessory cargo net for the rear area is also available. The trunk can be opened using the remote key fob, a button located on the driver’s interior door or by depressing a discretely located button under the trailing edge of the trunk lid.

A valet lock-out switch is located in the NSX’s glovebox. The driver can activate the valet lock-out switch and lock the glovebox to prevent access to the locked rear cargo area.

Sport Hybrid Power Unit

The exceptional dynamic capabilities of the new Acura NSX are enabled by its revolutionary Sport Hybrid Super Handling All-Wheel Drive power unit, the first such system of its kind in a supercar, utilizing electric motor torque in combination with engine power to enhance every element of dynamic performance-acceleration, handling and braking.

At the heart of this new Sport Hybrid power unit is a bespoke, mid-mounted twin-turbocharged, 75-degree, 3.5-liter DOHC V6 engine with dry sump lubrication, electric Direct Drive Motor, and an all-new 9-speed dual clutch transmission (9DCT). Together, these components comprise the rear power unit. Amplifying the instant responses and dynamic handling performance of the NSX is the front Twin Motor Unit (TMU), with two electric motors independently driving the left and right front wheels.

The NSX’s Sport Hybrid power unit offers exceptional horsepower and torque with a broad powerband for tremendous throttle response and acceleration. Peak total system output is 573 horsepower-500 horsepower from the gasoline engine and 73 horsepower from the front TMU and Direct Drive Motor.

By creating a vehicle propulsion system that utilizes both mechanical and hybrid-electric components rather than just a conventional gasoline-powered internal combustion engine, Acura endows the NSX power unit with constant and linear power anywhere in the powerband, at any speed, with virtually zero delay.

For example, at initial launch from a standstill, the front-mounted Twin Motor Unit (TMU) and the Direct Drive Motor immediately supplement power production from the twin-turbocharged V6 engine, using the abundant and instantaneous torque production inherent in electric motors. Conversely, once the vehicle has reached a steady state cruising speed, the twin-turbocharged V6 engine becomes the primary motive force for the vehicle, with the three electric motors providing supplementary power and/or yaw control when necessary.

While the primary focus in the development of the all-new Acura NSX’s clean-sheet power unit was all-out performance, efficiency and environmental sustainability are also important characteristics-as with any Acura powertrain. Therefore, the all-new NSX not only boasts a best-in-class EPA combined fuel economy rating of 21 mpg (20 mpg city/22 mpg highway), but it also meets the California Air Resources Board’s ultra-low emissions vehicle (ULEV) requirements.

Twin-Turbocharged V6 Engine

Featuring a wide V-angle of 75 degrees for a low center of gravity, the NSX’s 3.5-liter twin-turbo V6 engine achieves the ideal balance between power production, overall compactness and low mass. It combines both direct and port fuel injection, along with Dual Variable Valve Timing Control (VTC) to deliver optimal camshaft phasing, allowing for precision combustion control throughout the entire rpm band while achieving high power output.

Additional key engine design elements include a sand-cast aluminum engine block, lightweight and compact aluminum cylinder heads, plasma transferred wire arc thermal spray-coated cylinder walls (for high thermal efficiency with low weight and compact size) and a dry sump lubrication system that significantly reduces the engine’s center of gravity while ensuring consistent engine lubrication under high cornering load conditions.

The NSX utilizes swing arm-type valve actuators which allows for a compact head structure and reduces the inertial weight of the valvetrain by 22 percent compared to a rocker arm-type design. The innovative design was derived from Honda racing engines. Intake and exhaust variable cam timing (VTC) is deployed to provide an excellent balance of high power, torque, fuel efficiency, and emissions.

Turbocharging System

Developing a bespoke twin-turbo system for the all-new engine was a logical choice, offering a strong balance of high power with considerable torque, high fuel efficiency and low emissions, while also offering inherent packaging advantages. Maximum boost pressure is set at 105 kPa (1.05 bar, or 15.23 psi). High volumetric flow air-to-air intercoolers are adopted, dramatically reducing intake air temperature while simultaneously increasing the density of the air intake charge for maximum power production.

Making use of an electronic wastegate for each turbocharger for fast response and precise control, the single-scroll turbocharger design allows for the use of relatively small turbos to minimize weight and improve packaging while still meeting power and performance benchmarks.

Plasma Transferred Wire Arc Thermal Spray Coating

Utilizing an aluminum engine block and heads offered three key advantages compared to traditional cast iron block and head configurations: (1) greatly reduced mass; (2) improved thermal conductivity; and (3) improved heat dissipation. Most aluminum engines require the fitment of cast iron cylinder liners to provide sufficient wear resistance. But engineers on the Acura NSX’s power unit development team addressed this issue by employing a plasma transferred wire arc thermal spray to the cylinder walls-a recently developed technique that offers 52 percent better heat transfer (thermal conductivity) with greatly reduced weight versus cast iron liners.

Using a thin-diameter wire as feedstock material (approximately +/-1 mm), the process melts the wire down to an atomized form that can then be sprayed onto the cylinder walls. A supersonic plasma jet formed by a transferred arc between the tip of the wire and a cathode is used to spray the molten material, stacking the tiny particles on top of each other to form a very thin yet extremely wear-resistant coating.

Along with the improved engine efficiency via reduction of internal friction, additional benefits from the thermal spray process include a nearly seven pound decrease in overall engine weight compared to iron cylinder liners, improved wear resistance and reduced oil consumption, and increased horsepower/torque production and throttle response.

Furthermore, thanks to the addition of plasma transferred wire arc thermal spray, additional water channels are able to be placed between the cylinder bores for improved cooling efficiency via better control of coolant flow.

Racing-Inspired Cylinder Head Design

Using engineering and design expertise drawn straight from the company’s extensive racing experience, the cylinder heads fitted to the twin-turbo V6 are highly compact and include smaller valvetrain components. This resulted in a notable reduction of inertial weight as well as a 22 percent reduction of cylinder head mass compared to conventional designs. The reduction in mass also helps lower the vehicle’s center of gravity.

The cylinder heads utilize a three-piece water jacket for improved cooling efficiency and coolant flow control. Additionally, the race-inspired cylinder head design optimizes the swirling of intake air so that fuel mixes with it in a more ideal manner for improved combustion-thus improving efficiency and emissions performance.

High Specific Power Output

With a compression ratio of 10.0:1 the NSX engine has a specific power output of more than 140 horsepower per liter of engine displacement. The engine safely and reliably achieves the high specific output due to a number of advanced technologies including the efficient twin-turbo system, low internal friction, heat transfer properties of the plasma transferred wire arc thermal spray on the cylinder walls, sodium-filled exhaust valves, implementation of both direct and port injection, and the superior combustibility of fuel from the high-swirl ports.

Dual Variable Valve Timing Control (VTC)

The NSX engine incorporates proprietary Dual VTC variable valve timing control technology which delivers an excellent balance of high torque and maximum power output with reduced exhaust emissions and superior fuel efficiency.

At engine idle, Dual VTC stabilizes combustion for smooth idling by minimizing intake and exhaust valve overlap, therefore decreasing the amount of exhaust gas recirculation. During steady-state cruise or under light acceleration, the system reduces exhaust emissions and engine pumping losses by optimizing valve overlap. Under wide open throttle at low engine speeds, the overlap of the intake and exhaust cam timing is expanded so that the turbochargers can work at maximum efficiency for optimal power delivery and responsiveness. Conversely, when operating the engine at elevated rpms, overlap of the exhaust and intake timing is minimized for improved volumetric efficiency to create maximum power.

Direct & Port Fuel Injection

The NSX engine combines both direct and port fuel injection systems to provide outstanding power with exceptional emissions performance.

Direct injection is the primary means of fuel delivery within each cylinder, while port injection is used for additional power output in high-performance driving situations. The direct injection system’s electronic fuel injectors are mounted in the cylinder heads and spray a very fine, highly atomized mist of fuel directly into each cylinder under very high pressure so that the fuel ignites almost instantaneously and completely with ignition spark, maximizing engine performance and fuel efficiency with reduced emissions. Under high performance demands, the port injection system supplements the direct injection system, feeding fuel into the intake ports where it mixes with the incoming air for increased power production.

The direct and port injection systems are fed by two specially designed fuel pumps, one feeding the direct injection system at a fuel pressure of 65 psi, the other supplying the port injection system at 51 to 73 psi.

The Acura NSX’s engine includes advanced lean-burn combustion technology that allows for homogenous and weak stratified combustion to occur within the cylinder due to ultra-precise control of the fuel injection. By ensuring that fuel spray angle and direction do not interfere with the intake valves, along with a strong air/fuel swirl from the high tumble port, high power output and low emissions are effectively combined. Along with optimized piston head and intake port shapes, the highly accurate fuel spray and injection pattern play pivotal roles in this advanced combustion concept.

Intake Manifold

A two-into-one intake manifold design minimizes torque deviation between each bank of cylinders. Twin throttle bodies allow more air into the system and finer throttle control while simultaneously reducing the pulsation of air.

Exhaust System

Compact and lightweight, the stainless steel exhaust system fitted to the NSX includes two catalytic converters per cylinder bank and four outlets for excellent exhaust gas flow and low emissions. Silicon exhaust system mounts resist heat and offer a robust means of securing the exhaust system to the vehicle, helping to reduce vibration while ensuring system integrity and long life.

Intake Sound Control

To enhance the interior auditory experience, the NSX includes a new Intake Sound Control system that works cooperatively (via the Integrated Dynamics System) with the Active Exhaust Valve system.

Intake Sound Control utilizes a pipe, connected directly to the engine’s intake manifold, with an electrically operated butterfly valve that can be opened and shut, depending on the Integrated Dynamics System setting, and a diaphragm that translates high pressure air from the manifold to lower pressure sound waves. On the other side of the diaphragm, the single pipe then splits into two pipes that transmit sound to twin outlets in rear uppermost portions of the cabin. Sound transmission and effect are varied in concert with the four driving modes of the Integrated Dynamics System (Quiet, Sport, Sport+ and Track)-with 25 decibels sound pressure level range between Quiet and Track modes-a tremendous variance in audible sensation.

Active Exhaust Valve

An Active Exhaust Valve system has been developed for the new NSX that combines quiet and refined driving and pulse-quickening excitement, operating as a complementary component of the Integrated Dynamics System. The system utilizes two distinct exhaust paths controlled by two electrically-operated valves.

• In Quiet mode, the exhaust valves are closed and the exhaust gases pass through silencers for a more subdued exhaust sound. Power and torque production from the twin turbo V6 engine is ample.
• In Sport mode, the exhaust valves are closed unless driver demand is high enough and then will open.
• In Sport+ or Track modes, the Active Exhaust Valve system is open, bypassing the silencers for a full, uninhibited flow of exhaust gases and a full-throated exhaust note.

Together with cabin sound modulation technologies-Active Sound Control and Intake Sound Control-the Active Exhaust Valve system serves to create a customizable auditory experience both within and outside of the NSX-from the hushed silence of Quiet mode to the full concerto of Track mode, when the cabin is filled with sounds every driving enthusiast loves to hear-the high-performance “pop” from the exhaust when executing an upshift; the quick blip of the throttle upon downshifting; and the occasional distinctive off-throttle burble that is a welcome reminder of the power and torque capability of the twin-turbocharged V6 engine.

Dry Sump Lubrication

In another application of race-bred technology, the all-new Acura NSX is the first production Acura vehicle to use a dry sump engine lubrication system. By replacing the engine’s conventional oil pan with a separate oil reservoir and a dedicated chain-driven oil pump mounted directly to the lower engine block, the system is designed to prevent oil starvation under high lateral G loads.

After being fed to the engine for lubrication, oil is collected from the lower engine block by six separate scavenger pump impellers and then fed back into the oil tank by a pair of pump rotors.

Importantly, the adoption of a dry sump system allowed designers to mount the engine 2.4 inches (61 mm) lower within the chassis, significantly lowering the center of gravity thanks to the elimination of a traditional oil pan. The more efficiently cooled oil also helps promote maximum engine power output.

“Starter-less” Engine Start System

As a byproduct of its Sport Hybrid power unit, the NSX utilizes its Direct Drive Motor to start the engine, replacing a conventional 12-volt engine starter motor.

Along with a significant weight savings, further mass reduction was realized by eliminating the 12-volt starter ring gear normally required by a conventional engine starting system.

Engine Idle-Stop

To help improve fuel efficiency, the NSX comes equipped with idle stop capability. When the system is active and certain operating conditions are met, the NSX engine will automatically shut off when the vehicle comes to a stop. The system is not engaged when Sport+ or Track modes are selected. When stopped, a special cold storage evaporator in the air conditioning system helps maintain a comfortable cabin temperature even in warm weather.

Engine restarts are exceptionally smooth and quick, supported by the use of the powerful Direct Drive Motor as an engine starter. Idle Stop operation is also fully integrated into the operation of the Automatic Brake Hold system.

Engine Balancing and Break-In

The NSX power unit development team further improved engine performance and refinement through reduction in experienced noise and vibration. The latest in engine balancing technology and a number of new processes are applied to achieve optimal balance. These include the use of next-generation engine diagnostic equipment to more accurately measure engine imbalance, and the application of variable weight bolts applied to the eight mounting holes in the flywheel, and the addition of nine mounting holes in the crankshaft viscous damper which can be used for fine tuning. Achieving a high degree of harmonic equilibrium not only greatly reduces engine vibration, but also decreases wear of the engine’s internal componentry for superior reliability and longevity.

As an important additional quality step prior to fitment within the NSX, the engine undergoes a “hot fire” break-in program, wherein the engine is run under load on a specially designed engine dynamometer for an equivalent of 150 miles of service.

9-Speed Dual Clutch Transmission with Direct Drive Motor

The Acura NSX’s bespoke 9-speed dual clutch transmission (9DCT) works in concert with the Rear Direct Drive Motor to make full use of the power unit’s broad powerband, producing quick and precise gear changes that support the instant acceleration responses. As a key component of the power unit’s packaging, the 9DCT has been optimized for compact size, low mass and low center of gravity.

The 9DCT has a very wide ratio range that allows for optimal gear selection in any driving condition. First gear ratio is configured for maximum vehicle launch acceleration, while the close-ratio gears (2nd through 8th) are matched to make the most of the power unit’s powerband. Conversely, high gear (9th) has been optimized for fuel efficiency during steady-state highway cruising. When driving in ninth gear on a level surface at 60 mph, the twin-turbo engine is spinning at only 1,700 rpm.

In efforts toward compactness, the clutches and the differential are uniquely situated side-by-side in a common housing. Also, the parallel shaft layout reduces overhang from the rear axle while the center of mass is moved forward.

Quick Response Gear Shift System

One of the key parameters that sets a supercar apart from competing vehicles is how quickly it can execute gear shifts. To deliver superior shifting performance, the 9DCT features unique components to deliver lightning quick yet smooth gear changes.

Highly rigid shift forks composed of a specialized high-strength cast iron play a key role in providing quick shifts. A total of five shift forks are used for the gear actuator system: a one-way clutch is used for 1st gear; four shift forks are used for the 2nd through 9th gears; and a fifth shift fork is employed for Park and Reverse.

Gear Shift Actuator

Ultra-quick shift response and engagement with reduced weight (vs. conventional pneumatic or hydraulically operated gear actuators) is made possible by the use of a compact electric motor as a gear shift actuator. Weight is reduced by eliminating the high-pressure hydraulic pump that is typically used in a gear shift actuator system, while providing for excellent reliability and system robustness.

Electric Clutch Actuator

Like the aforementioned electric motor-powered gear actuator, the electric clutch actuator eliminates the need for a high-pressure hydraulic pump. Control of the clutch is accomplished via a closed-circuit hydrostatic structure, providing oil pressure on demand with greater efficiency.

Integrated Dynamics System Modes Modify Shift Characteristics

Adding to the performance characteristics of the NSX’s advanced 9-speed DCT is the ability to modify shift speed and feel via the distinctly different transmission settings within the driving modes of the Integrated Dynamics System:

• Quiet – Transmission shift map directs gear shifts at lower engine speeds
• Sport – Transmission allows the engine to rev more freely and makes gear changes in a higher RPM range
• Sport+ – Accommodates higher engine speed gear changes with quicker, more aggressively executed upshifts and downshifts
• Track Mode – Fastest upshifting-40 milliseconds faster than Sport+ settings

Flywheel Mass Damper

To minimize powertrain vibration, the flywheel has been designed to also act as a mass damper to minimize mechanical/harmonic vibration caused by oscillation, while helping to ensure structural integrity and longevity of the transmission case.

Limited-Slip Differential

The new NSX’s remarkably crisp turning capability and tractability is further enhanced by a mechanically-based limited-slip differential (LSD).

Designed to deliver excellent poise and stability while making of the most of the power unit’s ample power production, the torque-sensitive multi-plate clutch is lighter and more compact than a similar unit with a helical gear configuration. Also, the multi-plate design allows for improved wheel coupling for smoother and more efficient operation.

The NSX’s LSD torque bias ratio-an index for slip limit torque that compares torque shifted from a high rotation axle to a low rotation axle-has been optimized to provide two distinct LSD performance settings ideal for when the wheels are being driven or when the vehicle is coasting.

Engineered to complement the Twin Motor Unit (TMU) and Vehicle Stability Assist (VSA) systems with precision torque vectoring and enhanced traction maintenance, the LSD helps advance vehicle performance in a number of driving situations:

• Under Braking/Deceleration Approaching a Turn – Increases engine brake torque on the outside tire/wheel for improved vehicle stability
• Straight-line Driving – Torque is transferred left-to-right as necessary for enhanced vehicle stability when driving in a straight line.
• Under Acceleration while Turning – Overall vehicle tractability and poise is improved by shifting torque to the outside tire as traction from the inside tire decreases.

Rear Power Unit Mounting

By employing strategically-placed rear power unit mounting points-up high at the front of the engine along with a mounting cradle bracket down low at the rear (connected to the transmission)-roll, pitch and yaw motion of the power unit is greatly reduced, providing greater acceleration response and handling ability.

SPORT HYBRID SYSTEM

The Sport Hybrid system is a suite of highly advanced components at the center of the hybrid-based systems of the power unit. Each component is engineered to minimize both weight and size in order to reduce overall vehicle mass, and carefully packaged within the NSX to lower and center the mass within the vehicle. Collectively, the Sport Hybrid system includes the Twin Motor Unit (TMU), Direct Drive Motor, Power Drive Unit (PDU), and Intelligent Power Unit (IPU).

Twin Motor Unit (TMU)

The new Acura NSX’s instant and linear acceleration coupled with outstanding dynamic capability is enabled in large part by its front-mounted Twin Motor Unit (TMU). Designed to be as small and lightweight as possible while delivering ample torque and power, as well as precise torque vectoring to the front wheels, the TMU is a unique and highly efficient solution to provide supplemental power to the twin-turbo V6 engine for instantaneous acceleration whenever desired.

The TMU provides instant torque as well as AWD capability, allowing direct and immediate acceleration with a heightened sense of G-loading that invigorates the senses. Further, the TMU can dynamically apportion its torque to create a yaw moment, enhancing cornering performance. Finally, the TMU recovers braking energy during deceleration to supply power to the hybrid batteries.

Inside its die-cast aluminum housing are two electric motors positioned back-to-back. Each 36 horsepower motor powers a single front wheel and can also apply negative torque to the same wheel. A gear mechanism allows the motors to decouple and still provide on-demand torque vectoring, helping to improve efficiency in certain conditions.

To achieve maximum acceleration from a standstill and to meet the NSX engineering and design team’s target of instant response, the TMU and Direct Drive Motor provides the bulk of the accelerative force during initial acceleration from a standstill. After the first 0.15 seconds/0.1 G off of the line, the high horsepower and torque from the twin-turbocharged V6 engine enters the fray, along with still more power from the Direct Drive Motor. From there, the engine exponentially increases its power contribution as the vehicle continues accelerating.

The TMU is also a key motive force for driving in the Quiet mode setting of the Integrated Dynamics System, allowing for hushed vehicle operation by powering the NSX electrically for short distances.

Direct Drive Motor

The Direct Drive Motor, mounted between the engine and transmission, is ideally packaged to provide additional torque and power assist to the rear wheels in the most efficient manner.

To help eliminate the response delay typically associated with turbocharged engines, the Direct Drive Motor (shown at left) acts directly on the engine’s crankshaft which, together with the TMU, help the NSX realize immediate, high-output, high-torque acceleration performance. The effectiveness of this design is particularly noticeable in everyday driving when accelerating from a standstill and at low engine speeds. Additionally, the Direct Drive Motor acts as a generator to help charge the hybrid batteries, while also acting as the engine starter.

The Direct Drive Motor is liquid cooled to ensure ample cooling and heat dissipation even when the system is being worked hard, such as on a track day.

Intelligent Power Unit (IPU)

Neatly packaged in the cabin, just forward of the rear bulkhead, the Intelligent Power Unit (IPU) acts as the primary heart and brains of the E-Drive system, integrating the lithium-ion battery pack, junction board, a high-voltage distribution bus bar, 12-volt DC-DC converter, electric motor ECU, lithium-ion battery ECU and the ECU for the TMU.

Thanks to the integration of a next-generation lithium-ion battery pack and a caseless structure for key Intelligent Power Unit (IPU) components, the Acura NSX’s IPU system is 35 percent smaller and 30 percent lighter than the IPU in the Acura RLX Sport Hybrid sedan.

When driving in Sport, Sport+ and Track modes, the vehicle’s air conditioning system is used for supplemental cooling of the IPU for optimal efficiency and performance. During development, the system was tested extensively in the desert heat of Dubai in order to ensure proper function in extreme ambient temperatures.

Lithium-ion Battery Pack

Packaged within the IPU is the lithium-ion battery pack which stores the electrical energy to power the TMU and Direct Drive Motor.

The high-output battery pack consists of four modules, each with 18 individual battery cells (72 cells in total) contained within a specially designed caseless structure that utilizes the vehicle body itself for a lightweight yet sturdy housing. Compared to the latest Acura RLX hybrid, the NSX battery pack’s power density (stored energy per kilogram) has been increased 10 percent while energy density is up 15 percent.

Power output and efficiency of operation have been further improved by implementing a cooperative battery cooling system, fed by fresh cool air channeled into the passenger compartment via the vehicle’s air conditioning. Cool air from within the cabin circulates through ducting to cool both the lithium-ion batteries as well as the DC/DC converter.

Power Drive Unit

The Power Drive Unit (PDU) dictates the power management strategy of the Sport Hybrid SH-AWD system, including motor power and battery recharge. The PDU also incorporates three separate converters (converting direct current to alternating current) for use by the power unit’s three electric motors: the twin motors of the front-mounted TMU and the Direct Drive Motor. This compact “three-into-one” PDU design is critical to the system’s compact packaging and the ability to mount it centrally in the vehicle, in the center tunnel (beneath the center console).

Chassis

The next-generation NSX chassis, consistent with the Sport Hybrid SH-AWD powertrain and Multi-Material body, combines fundamental concepts in sports car design with advanced new technologies to elevate and enhance the NSX driving experience.

Anchored to the vehicle’s ultra-rigid aluminum-intensive space frame and industry-first ablation cast frame nodes, the NSX’s sophisticated all-aluminum front and rear suspension systems-augmented by third-generation active magnetorheological (MR) damper technology, dual-pinion variable gear ratio electric power steering (EPS) system, and electro-mechanical sports brakes-elevate the NSX’s dynamic capabilities and responses to driver inputs while supporting the breakthrough capabilities of its Sport Hybrid SH-AWD system.

Deceleration capability is enhanced with a next-generation electro-servo braking system that combines the effectiveness of a mechanical (friction) braking system that utilizes large ventilated rotors and aluminum brake calipers with the efficiency of a seamlessly integrated regenerative braking system.

Suspension

One of the key traits that set the original Acura NSX apart from its contemporaries was its novel use of a finely-tuned aluminum suspension. The NSX team went back to the fundamentals to design the next-generation NSX’s lightweight all-aluminum, fully independent front and rear suspension system.

Utilizing lightweight yet rigid aluminum alloy components at all four corners, the NSX’s suspension keeps unsprung weight to a minimum while retaining component stiffness for instant and accurate response. Designed to work seamlessly with the advanced electric power steering system, the optimized tuning of the NSX’s steering and suspension systems allow for both nimble responses at low speeds, coupled with superlative high-speed stability.

Front Suspension

The all-aluminum front suspension has been optimized with compact and lightweight components and suspension geometry developed for superior handling performance, crisp and communicative on-center steering feel and excellent stability. Specifics include:

• All-aluminum, forged double wishbone/cast aluminum knuckle design
• Double ball joint lower control arm to mitigate torque disturbance from the front Twin-Motor Unit (TMU) torque vectoring
• No unwanted steering kickback
• Third-generation active MR dampers

Rear Suspension

Featuring lightweight all-aluminum components, the rear suspension employs a sophisticated independent multi-link design. Specifics include:

• All-aluminum, forged multi-link/cast aluminum knuckle design
• High lateral rigidity
• Third-generation active MR dampers

Active Magnetorheological (MR) Dampers

Making use of Acura-tuned third-generation magnetorheological (MR) dampers in place of conventional shock absorbers, the Acura NSX’s highly advanced suspension essentially acts as a continuously adaptive “active” system that can adjust damping forces in a fraction of a second, instantaneously adapting to the driving situation, driver inputs and road conditions.

The new third-generation MR damper technology offers the widest range of damping force and the fastest response for maximum handling capability and ride quality in all driving conditions. The reservoir within each of the NSX’s MR dampers is filled with a special magnetorheological (MR) fluid that contains microscopic metallic particulate. Running an electric current to each MR damper creates a magnetic field within the fluid that causes an instantaneous change in the fluid properties and resulting change in damping force.

While many active dampers make use of a an internal valve-based technology to vary the damping force, the Acura MR dampers utilize a valve-less design that offers a much broader range of damping force and more rapid response.

The lightning-quick response rate and superior damping properties allow the NSX to make optimum use of a high-performance tire design and low-profile sidewall while still providing comfortable ride quality.

The MR dampers also function as a component of Integrated Dynamics System via two unique damper tuning settings-one biased toward unsprung mass control, used for Quiet and Sport modes; and a second with optimized performance tuning biased toward sprung mass control, used for Sport+ and Track modes.

Wheels and Tires

The Acura NSX chassis design and engineering team has configured a bespoke wheel and tire package that extracts optimal performance from the platform, not only in lateral grip but in every element of driving performance including acceleration and braking.

The standard wheel design package for the new NSX includes lightweight Y-spoke forged aluminum alloy wheels wrapped in Continental Conti-Sport Contact 5P tires (245/35ZR19 front; 305/30ZR20 rear) developed jointly with Continental specifically for the NSX. This tire package strikes an excellent balance between high performance and everyday drivability, offering high levels of traction in both wet and dry conditions.

The unique “Y” wheel design is a result of the NSX engineering team’s extensive research to find the strongest and most rigid spoke structure with the least amount of material. Forged in high-strength aluminum, the wheel design offers a lower total weight than any wheels of similar size and material composition within the NSX’s competitive class.

An optional factory-installed wheel set utilizes a stylish thin interwoven wheel spoke design featuring a machined/polished, fully polished, or fully painted finish.

Both wheel packages feature staggered fitment to optimize chassis performance, the front wheels measuring 19 x 8.5J, with wider 20 x 11J wheels at the back.

The Acura NSX comes standard with high performance summer tires; ultimate handling performance tires for track day outings are optionally available.

Electric Power Steering (EPS)

The NSX’s sophisticated electric power-assisted rack-and-pinion-based steering system (EPS) responds instantaneously to steering input and automatically adjusts to deliver the appropriate level of power assist in all driving situations, exhibiting many advantages over an engine-driven hydraulic-based steering system:

• Reduced weight and improved packaging due to its compactness and fewer components-no hydraulic fluid, pump, fluid storage tank or hydraulic fluid lines/hoses
• Reduced levels of noise and vibration without the hydraulic system
• Improved fuel efficiency with no parasitic drag from an engine-driven power steering pump

“It was a huge challenge to create a lively and communicative Electric Power Steering (EPS) for the driver that would be truly worthy of a next-generation Acura NSX,” said Chris Dundon, chassis design project leader. “But by optimizing the mechanical components within the system, plus careful tuning of the software, we were able to achieve our goal of delivering highly responsive steering with outstanding driver feel.”

The NSX electric power steering (EPS) system utilizes a variable gear ratio. When on center, the ratio is tuned for optimal high speed control and stability. Off center, the gear ratio becomes progressively quicker for improved turn-in and maneuverability at low and mid speeds while minimizing the need for hand-over-hand motions.

The addition of a motor-assisted second pinion to the EPS system more precisely assists with turning force and steering assistance based on a number of factors-engine speed/electric motor torque from the Sport Hybrid power unit, steering angle, vehicle speed, steering force and EPS steering maps/algorithms-leading to improved steering feel and feedback for the driver.

Like the MR damper suspension system, the NSX features two distinct EPS steering settings-one for the Quiet/Sport modes and another for Sport+/Track modes of the Integrated Dynamics System-with tuning adjusted to deliver an increased level of acuity and performance for an even greater degree of driver feedback by reducing steering assist based on vehicle speed and steering angle for the more performance-oriented Sport+ and Track driving modes.

Next-Generation Super Sports Brakes

The NSX’s next-generation braking system-combining conventional mechanical (friction) with an advanced electro-servo system and regenerative braking-inspires confidence in every driving situation thanks to the highly communicative brake pedal feel and linear, virtually fade-free brake performance.

Of high importance was developing a regenerative braking system that blends seamlessly with the Acura NSX’s conventional brake system, with exceptional brake pedal feel and predictable stopping performance.

Regenerative Braking

By supplementing the high-performance mechanical (friction) braking system with regenerative braking, the NSX captures “free” electricity and feeds it back into the lithium-ion battery pack. Unlike many such systems, the NSX blends this capability in a seamless and effective way, resulting in intuitive brake pedal feel with superb feedback.

Regenerative braking begins as soon as the driver releases the throttle pedal to maximize lithium-ion battery recharging during normal driving.

Electro-Servo Brake System (ESB)

The electro-servo braking system has been designed and developed through rigorous testing to provide the driver with superb feedback and intuitive brake pedal feel in all conditions. This allows drivers to finely modulate braking force in any condition-from low speed city traffic, to flat out track driving.

The high degree of brake pedal feel is achieved through precise pressure control by the electro-servo brake (ESB); the operation of the ESB is then finely tuned to deliver consistent and proper brake pedal feel for each of the drive mode settings of the Integrated Dynamic System.

Importantly, the brake pedal feel remains consistent and predictable across the four different drive mode settings of the Integrated Dynamic System whether in city or highway conditions, or driving all-out on the race track.

Brake System Components

The high-performance Brembo braking system features large six-piston calipers with 14.5-inch, two-piece iron and aluminum ventilated brake rotors up front, and four-piston calipers with 14.0-inch, two-piece iron and aluminum ventilated rotors at the rear. All calipers are of an aluminum mono block design, which provides even pressure distribution across the surface of the brake rotor with outstanding heat dissipation and excellent rigidity. The two-piece iron and aluminum rotors provide consistent brake pad-to-rotor surface contact with high heat capacity and cooling efficiency. Additionally, this two-piece rotor configuration allows for much greater thermal expansion compared to a one-piece design.

An ultra-high-performance carbon ceramic brake rotor package (15.0-inch rotors up front/14.0-inch rear), available as a factory option, offers a substantial reduction in weight, saving nearly 52 pounds (23.5 kg) over the standard brake package along with improved fade performance in high stress conditions, such as track sessions. The package includes a choice of three different brake caliper color options: red, black or silver

Optimized Brake Cooling

Through extensive research and development, optimal brake cooling has been achieved as an integral part of the NSX’s advanced aerodynamic design. Even under the high stress scenario of extended track drives, front and rear brake cooling is always robust, providing consistent deceleration capability, brake pedal feel and superb vehicle stability.

Typically, effective brake cooling at the rear of a mid-engine vehicle is difficult due to component packaging, and the proximity of the engine and transmission and the heat they generate. Rear brake cooling on the NSX is enhanced by the innovative use of the NSX’s rear sub-frame where two air duct paths have been designed into the hollow structure. Air passing through the sub-frame is precisely directed to the rear brakes, using specially tuned air deflectors located on the rear suspension arms. Thanks to this clever piece of engineering, rear brake performance is further optimized to support both everyday and at-the-limit driving performance.

Powertrain Mounting System

With the newly designed twin-turbocharged V-6 engine, special consideration was given to how the powertrain-engine, Direct Drive Motor, 9-speed dual clutch transmission and differential-is secured to the chassis in order to achieve outstanding dynamic properties while producing the lowest levels of noise and vibration.

The solution was to create an engine cradle system that combines hydraulic engine mounts with a rigid aluminum sub-frame plate that simultaneously supports the engine while acting as a vibration and noise inhibitor. Powertrain mounts are ideally located-with an axis that passes through the powertrain’s center of gravity-to minimize pitch and roll movement of the powertrain mass. Testing and analysis demonstrated that this novel configuration provides notably improved vehicle handling performance while exceeding targeted NVH levels.

Fuel Tank

Finding the shape and placement of the fuel tank for best weight distribution and low center of gravity was a difficult design task, especially when taking into consideration protection in the event of a rear-end collision. The solution was a design using twin tanks composed of a specialized resin material. That allowed for tremendous flexibility in the shape of the fuel tanks for optimal packaging and enhanced safety performance. The tanks are centrally located between the engine and the IPU, which is behind the rear bulkhead.

Multi-Material Body

To unlock the full potential of the 2017 Acura NSX’s Sport Hybrid SH-AWD powertrain and fulfill the high targets set for its total dynamic performance, the engineering team took a bold and challenging new direction: a completely clean-sheet, multi-material approach that breaks new ground in the automotive realm-with new materials, new construction methods and new thinking in supercar body design.

By starting from scratch, the NSX development team was able to choose the optimal material application and construction methodology for each area of the body, targeting both low mass and ultimate rigidity while also satisfying other critical design objectives such as superior outward visibility, world-class crash safety performance and world-class quality and durability befitting a next-generation Acura supercar.

The end result is the NSX multi-material body, with its aluminum intensive space frame, designed to achieve structural rigidity far superior to its top-in-class competitors. This high level of dynamic rigidity provides a crucial foundation for the NSX’s instantaneous responses. As a result, drivers will feel their inputs directly translated to the car’s actions with incredible speed and fidelity, while simultaneously allowing the maximum potential of the Sport Hybrid SH-AWD system to be realized by the car and driver-the essence of the New Sports eXperience.

“The challenge for the body design team was to create a body with a high level of rigidity to be able to transmit the full feeling of this powertrain directly to the driver without delay,” said Shawn Tarr, chief engineer for the NSX body development. “While the all aluminum unibody of the original NSX was ahead of its time, we would need to look to world-first technology in order to achieve this new level of rigidity.”

The Acura NSX body construction-performed entirely in-house at Acura’s Performance Manufacturing Center (PMC) using domestic and globally-sourced parts-is undertaken with innovative new techniques and technologies, and with a commitment to quality unmatched in the supercar realm. As one critical example, MIG welding of the aluminum-intensive space frame is performed entirely by high-precision robots, with all welds and body components undergoing a detailed inspection by highly skilled PMC weld technicians.

Building quality and accuracy into the space frame eliminates the post-construction machining activity that is common in low-volume vehicle manufacturing, including many competing vehicles. This same commitment to next-generation quality through the ideal blend of machine precision and human craftsmanship can be found in every aspect of NSX’s body construction, finishing/painting and assembly, and is readily identifiable in the final product.

Multi-Material Space Frame

The NSX multi-material body with aluminum-intensive space frame offered the development team the best structural rigidity and lowest platform weight along with superior packaging for the power unit. NVH is also greatly minimized by the NSX’s tremendous global rigidity benchmarks-two times static and three times dynamic levels of torsional rigidity demonstrated by the next highest competing vehicle evaluated by the NSX development team.

Highly rigid and reinforced extruded aluminum beams comprise the majority of the space frame and are utilized for the front and rear frame rails and cross members, front and rear bulkhead frame members, floor cross members and side rails. To further aid noise attenuation, a number of these aluminum extrusions are filled with acoustic spray foam, which is used in 38 different locations.

Cast aluminum nodes serve as joining points for the extruded aluminum frame members and as ultra-rigid mounting points for the vehicle’s front and rear suspension systems, as well as its rear power unit. These nodes are either gravity die cast or, in front and rear crush zones, formed using advanced new ablation casting technology, a world’s first automotive application.

In another world’s first, the upper portion of the A-pillars and roof rails, which comprise one continuous section, are formed using three dimensionally bent and quenched ultra-high strength steel tubing. This new metal forming process allows enhanced styling and outward visibility while providing for high roof-crush strength.

Aluminum stampings are utilized as lightweight closure panels for the rear floor, rear bulkhead and B-pillars. The front floor panels are constructed of carbon fiber for strength and low weight.

Ablation Cast Nodes

One of the most difficult design challenges in the development of the all-new Acura NSX was to minimize the front and rear overhangs of the vehicle while managing collision energy absorption in key areas for crash safety performance and maintaining optimal structural rigidity. To solve these complex and competing design imperatives, Acura engineers developed innovative new technology called ablation casting, an all-new material application and a world’s-first application in the automobile industry. Ablation casting was matured from a fundamental research theme to production vehicle application within the development cycle of the new Acura NSX-a major design, engineering and manufacturing achievement.

Ablation casting is utilized in the creation of six joining members, or nodes-two upper and two lower nodes in the front frame, and two nodes in the rear frame. These nodes also serve as ultra-rigid mounting points for both the front and rear suspensions. The front upper nodes are designed to absorb and dissipate energy in a frontal collision. The two ablation cast nodes at the rear of the vehicle are designed for high strength to mitigate forward movement of the power unit in the event of a severe rear collision.

Ablation casting involves the rapid cooling of a sand-cast aluminum component via the precise application of water jets, which ablate the sand mold while cooling the part. This process allows for the fine-tuning of both the cast part’s shape and its material properties while minimizing weight with hollow forms and optimized wall thicknesses. Unlike traditional castings, the high-strength and ductile properties of the ablation cast members allow these sections of the space frame to progressively crush at 155 kN of load; and the rear frame nodes are designed to withstand up to 210 kN of load.

The ablation cast nodes are produced in-house at the company’s Anna, Ohio engine plant, which has extensive experience with precision casting. The Anna Engine Plant is the only automotive production facility in the world utilizing ablation casting technology.

3-Dimensional Bent and Quenched Ultra-High Strength A-Pillar

The original NSX was known for its outstanding forward visibility, giving drivers a feeling of being connected to the road while optimizing visibility, and this design attribute was considered essential to preserving a core characteristic of the NSX driving experience. For the next-generation NSX A-pillars, new advancements in forming ultra-high strength steel parts provided the ideal solution, meeting the engineering team’s goals for safety performance while maximizing forward visibility.

The NSX’s A-pillars have been precisely crafted using an all-new, three-dimensional forming and tempering process that allows for a complex part shape with ultra-high tensile strength. This “3D bent and quenched” component is heated and then shaped in three dimensions by an articulating robotic arm, after which the part is quenched using water jets to achieve an ultra-high tensile strength of 1,500 megapascals. This process enables a very thin cross-section with precise shape specification and tolerances, while also meeting the increased structural rigidity standards for roof-crush performance. Utilization of this process reduced the width of the A-Pillar-at just 3.5 inches (89 millimeters) in width-by one inch (25 mm) compared to a conventional construction process; the view is a full 36 percent less obstructed than the next-best supercar evaluated by the Acura team and even better than the original NSX.

To prevent galvanic corrosion, the component receives an electro-deposited coating before being joined to the stamped steel structure at the base of the A-pillars.

Carbon Fiber Floor

When evaluating material composition and placement throughout the body, the design team determined that carbon fiber would serve as the ideal material for the driver and passenger floor section. In addition to its light weight, the material is strong enough to handle the loads occupants place on the floor during vehicle ingress/egress. Aluminum sheeting would have required additional cross-member frame support beneath it which would have in turn added additional weight.

Space Frame Construction

A number of advanced technologies and techniques are used in the construction of the Acura NSX space frame, which is conducted entirely in-house at the company’s new Performance Manufacturing Center in Marysville, Ohio. The NSX development and manufacturing teams were determined to maintain in-house control of the complete body construction process to ensure the highest levels of quality and performance for Acura customers.

Through the implementation of strict manufacturing/build processes and quality controls, the dimensional accuracy of the multi-material body is maintained throughout the construction process, eliminating the need for post-process machining. This is a unique manufacturing system and a great point of pride for Acura, allowing the team to achieve quality and accuracy levels superior to its competitors.

Metal Inert GAS (MIG) Welding

Metal Inert Gas (MIG) welding is utilized for the majority of the aluminum space frame construction. The frame contains more than 860 MIG weld points, where more than 112 feet (34 meters) of MIG wire is applied. Most welding is done by fully automated robotic weld arms which offer exceptional precision and control.

For the underbody section of the space frame, construction is done in a series of four stations, where highly skilled weld technicians work in tandem with automated robotic weld machines to ensure the highest quality parts. Specialized picture frame-style fixtures, developed in-house, are used to hold the component pieces, allowing for precise control of the weld process and dimensional accuracy of the part. Four of these fixtures are able to rotate 360-degrees to improve the access of robotic weld arms to the part and to allow for full datum referencing (highly accurate measurements between lines on a three-dimensional X, Y and Z axis) of the part.

Strategic sequencing of the numerous weld processes mitigates the potential for parts deformation from heat buildup, a common challenge in the welding of aluminum components. The quality of welds and dimensional accuracy of the part are confirmed at each station by technicians through visual inspection.

The floor and upper components of the space frame are then joined by large, fully robotic general welders, which also utilize rotating trunion-type fixtures with 360-degree movement. Twin robotic weld arms are able to conduct welding processes simultaneously to aid in both manufacturing efficiency and in the uniform distribution of heat, mitigating the potential for part deformation.

Additional body joining technologies including self-piercing rivets, flow-drill screws, and roller hemming, each chosen for its specific and unique qualities within a given element of the overall space frame construction.

• Self-piercing rivets (SPR) allow for the joining of two or more layers of material without having to pre-drill or punch a hole and are ideal for joining sheet materials while providing an exceptionally watertight joint. The NSX space frame contains more than 345 self-piercing rivets.
• Flow-drill screws (FDS) are used in the place of a nut-and-bolt application in numerous areas of the space frame, reducing both weight and parts complexity. FDS are also particularly well suited to areas of the body where one side of the part is inaccessible by conventional tools, such as in an extruded component. More than 245 flow-drill screws are applied to the NSX space frame.
• Roller Hemming joins two pieces of sheet metal by creating a sharp-angle bend, allowing the metal to be folded back over itself, creating a strong and tight joint with a clean and finished edge. There is nearly 60 feet (18 meters) of roller hemming edge on the NSX space frame.

Space Frame Advanced Conversion Coating

Prior to final assembly-where the space frame is fitted with the suspension, powertrain, electrical, interior and other componentry-the fully constructed space frame undergoes an advanced conversion coating process using a zirconium pre-treatment material and an e-coat process as an additional barrier to galvanic corrosion while maintaining a low environmental impact.

The use of zirconium, an Acura and Honda company first, eliminates more than 90 percent of the waste byproduct that results from the use of more conventional zinc-phosphate material. This byproduct, which contains heavy metals, must be disposed of in landfills, creating a significant waste stream. The use of a zirconium conversion coating is part of the effort to create a manufacturing process with a low environmental impact, consistent with the ideal of a next-generation hybrid supercar.

Body Repair and Serviceability

To assist in the ease and cost of collision repair, as well as to protect to a high degree the dimensional accuracy and integrity of the NSX space frame during a collision repair, the NSX development team worked closely with Acura service engineering team members to implement an overall modular construction concept: Space frame components can be purchased and replaced individually or as pre-assembled modular replacement sections. For example, there are “light-collision” and “medium-collision” replacement sections for both the front and rear sections of the vehicle, which are designed to minimize the amount of welding activity required.

For extensive servicing of the powertrain (engine, rear motor and transaxle), the team designed a modular rear inner body section-once the rear fascia panel is removed, the entire trunk section of the vehicle can be removed as a single unit to permit easy and unrestricted access to the mid-mounted V-6 engine. The trunk structure also helps locate outer body panels.

Safety and Driver-Assistive Technology

Providing for the safety of Acura customers and other road users has been a point of paramount importance for the Acura brand from its inception. Like all Acura vehicles, the 2017 Acura NSX starts with stable, precise and predictable driving dynamics-steering, handling and braking-as the foundation for active safety performance and collision avoidance. To provide a high-level of occupant protection in the event of a collision, the Acura NSX employs its advanced multi-material body design along with both primary and supplemental restraint systems, which work as a system to effectively manage the energy in a collision, minimizing cabin intrusion and mitigating occupant injury.

The NSX’s innovative multi-material space frame utilizes cast aluminum nodes-including a world’s first application of ablation casting technology-and highly rigid extruded aluminum frame members for superior crashworthiness and occupant protection with light weight and high rigidity. The NSX also utilizes the world’s first application of a three-dimensionally formed and water jet-quenched ultra-high-strength steel for its A-pillar construction, which offers robust structural rigidity including roof-crush performance.

Furthermore, the multi-material space frame design and the packaging of hybrid componentry, including the vehicle’s lithium-ion batteries and high-voltage systems, have also been optimized for both occupant protection and for the safety of emergency personnel (first responders).

Standard primary and supplemental restraint systems include:

• Single-stage driver and dual-stage passenger multiple-threshold front airbags (SRS)
• Driver knee airbag
• Side airbags
• Side curtain airbags with rollover sensor
• Three-point seatbelts with a load-limited equipped automatic tensioning system

Accompanying these passive safety technologies, an additional level of safety performance is afforded by these advanced active and passive safety technologies:

• Vehicle Stability Assist™ (VSA®) with Traction Control
• Anti-Lock Braking System (ABS) with Electronic Brake Distribution (EBD) and Brake Assist
• Multi-Angle Rearview Camera with Dynamic Guidelines
• Tire Pressure Monitoring System (TPMS) with Location and Pressure Indicators
• LED Daytime Running Lights

Multi-Material Space Frame – Occupant and Component Protection

The NSX’s aluminum-intensive multi-material space frame utilizes a combination of materials throughout the platform for high strength and rigidity in the event of a collision. The NSX’s space frame construction consists of highly rigid aluminum extrusions, aluminum stampings, high-strength steel stampings, and ablation cast aluminum frame nodes (integrated with front and rear frame rails) which serve as critical components in the absorption and dispersion of energy in both front and rear impacts.

Additional platform fortification and occupant safety performance is provided by the world’s first automotive application of 3-dimensional bent and quenched ultra-high-strength A-pillars, which support the overall safety performance of the body, including roof-crush performance, while providing for outstanding forward visibility.

Strength and Energy Absorption with Ablation Cast Nodes

To achieve improved occupant protection and crashworthiness, the NSX’s body/chassis engineering team opted to use an all-new material technology-ablation cast nodes-over the design and fitment of traditional aluminum castings within the crumple zones of the multi-material space frame. The Acura NSX represents the world’s first automotive application of this new casting technology.

Ablation cast nodes have been fitted at key junctures within the front of the space frame to help optimize impact protection for the vehicle’s occupants in the event of a collision. Strong and stout, these ablation cast nodes help to minimize overall vehicle weight while offering superior strength and tremendous ductility to facilitate energy absorption in a collision. An added benefit in the ablation casting process is the flexibility to tune the component’s wall thickness for optimal weight, strength and deformability.

The space frame’s front nodes are designed to deform and in the process to absorb energy in a frontal collision, helping to minimize the transfer of kinetic energy to the cabin. Additionally, two ablation cast nodes in the rear frame are designed for ultimate rigidity to transfer crash energy into the extruded aluminum rear frame rails in order to mitigate the potential for forward movement of the rear power unit in the event of a rear collision.

Ultra Thin, Ultra Strong A-Pillars Use World First Technology

Another innovative new technology application designed into the platform of the Acura NSX is the implementation of A-pillars composed of three-dimensionally formed, ultra-high-strength steel members. The fabrication method allows the pillars to be substantially smaller in cross section than conventional methods, greatly improving visibility while exceeding federal roof crush standards. This is the world’s first application of the fabrication technology within the automotive industry.

The A-pillar cross section, at 89 millimeters, is approximately 35 millimeters narrower than a part using a traditional stamped-steel construction method.

Fuel Tank Design/Packaging

The NSX’s 15.6 gallon fuel reservoir is a twin-tank system designed to enhance safety performance in the event of a rear-end collision. By using a twin-tank configuration, the design team was able to package the fuel tanks in the safest location possible-tucked neatly between the rear bulkhead and the engine.

Intelligent Power Unit (IPU) Packaging

The Intelligent Power Unit (IPU), containing the vehicle’s lithium-ion hybrid battery, is strategically packaged inside the cabin in front of the rear bulkhead, optimizing protection in the event of a frontal or rear collision. Further, the location helps protect the IPU from damage in a side impact by the use of highly rigid B-pillars and cross-car extrusion members. In testing the performance of this system, engineers went beyond standard government crash safety protocols for side impact performance, which engage the vehicles door structure (forward of the IPU) and tested a side pole impact occurring directly on the vehicle’s B-pillar with no damage to the IPU/battery.

Three-Point Seatbelts with Automatic Tensioning System

Both the driver and passenger seatbelts are equipped with an automatic tensioning system to help protect the vehicle’s occupants in the event of a collision. When an impact occurs, the automatic tensioning system tightens the seatbelts (shoulder and lap) to help position the occupant firmly in the seat within the first few milliseconds of the collision. In the event of a severe, high-speed collision, if deceleration forces rise above a predetermined level, the automatic tensioning system will release a small length of seatbelt webbing to reduce the seatbelt retention force on the occupant, limiting peak restraining forces.

Single-Stage Driver, Dual-Stage Passenger, Multiple-Threshold Front Airbags

Single-stage driver and dual-stage passenger, multiple threshold front airbags (SRS) offer superior safety performance for the vehicle’s occupants. The SRS system is able to detect crash severity, seatbelt usage, and additional factors that allow for optimized deployment timing as well as the capability to inflate the dual-stage passenger airbag at different rates of expansion.

The single-stage driver’s airbag promotes early restraint while maintaining constant pressure by reducing airbag volume early and maximizing volume later in the deployment. Along with proper seatbelt use, the single-stage driver and dual-stage passenger multiple threshold front airbag system helps to reduce the chance for head/neck and upper body injuries in the event of a frontal collision. The front airbag system is neatly concealed, with the driver’s airbag housed within the center of the steering wheel and the passenger’s airbag seamlessly contained and hidden out of view within the dashboard. A great deal of time and effort was put into eliminating the seam around the passenger airbag in keeping with the quality execution and design aesthetic throughout the entire cabin.

Depending upon the severity and direction of a collision, activation of the multiple threshold front airbags may occur independently of the deployment of side airbags or the side curtain airbags. In addition, the airbag system also uses sensors in the seat to assess the weight of the front passenger. The passenger airbag is shut off if the weight sensors indicate that an infant or small child is occupying the passenger seat, although the NSX is not recommended for passengers age 12 or younger.

Driver Knee Airbag

The driver’s knee airbag is designed to supplement the driver’s single-stage airbag in the event of a frontal collision by helping keep the driver in proper position. The driver’s knee airbag also provides improved packaging benefits. By utilizing an airbag instead of a knee bolster, the design team was able to provide improved knee clearance for the driver, aiding comfort and ease of vehicle ingress/egress.

Side Airbags

Packaged within the driver and passenger seat side bolsters, the side airbags are designed to deploy and inflate quickly to maximize potential protection for properly-seated occupants, helping to protect the occupants’ upper body (thorax and pelvis) from injury, or evacuate (vent) expanding gases before fully inflating if an occupant is positioned in the airbag deployment path, helping to mitigate the potential for occupant injury from the airbag deployment.

Side Curtain Airbags with Rollover Sensor

Mounted in the outboard roof area nearest to the door, side curtain airbags provide additional head and upper torso protection for the NSX’s occupants in the event of a moderate-to-severe side impact or vehicle rollover. The side curtain airbags effectively cover the window area from the A-pillar back to the C-pillar.

In the event of a rollover, a roll-rate sensor and multiple G sensors determine the rate of roll and deploy side curtain airbags at the correct moment for optimum protection. In the case of a rollover, the side curtain airbags on both sides of the vehicle will deploy. However, in the event of a moderate-to-severe side impact that does not result in a rollover, only the side-curtain airbag on the impacted side of the vehicle will deploy.

Vehicle Stability Assist (VSA) with Traction Control

Active vehicle safety and driving dynamics are enhance by the implementation of an advanced Vehicle Stability Assist™ (VSA®) with Traction Control system that can minimize traction loss or correct vehicle dynamics prior to it occurring, often before the driver even realizes.

By continually monitoring key dynamic parameters and driver inputs such as steering angle, throttle position, yaw rate, lateral G-force, vehicle speed, and individual wheel speeds to detect an oversteer or understeer condition, the VSA with Traction Control system-working in conjunction with the Sport Hybrid SH-AWD system and the power unit-is able to instantaneously and unobtrusively redirect torque and/or invoke the ABS braking system at each wheel as needed to help stabilize the vehicle. What’s more, it provides an additional level of safety performance by increasing tractability/reducing wheel spin in conditions with reduced traction such as while driving in wet, icy or snowy conditions.

Developed through extensive testing on both road and track, the NSX engineering team has created a vehicle stability system that is highly effective while minimizing intrusion on the driving experience. In most instances, the VSA response is so quick and seamless that vehicle instability is likely to be corrected absent the driver’s involvement or awareness.

VSA is fully functional in the Quiet, Sport and Sport+ drive mode of the Integrated Dynamics System, but its dynamic performance is tuned accordingly, with progressive variations in its threshold of engagement and level of intervention. If desired, the driver can disable the VSA with Traction Control when operating the Acura NSX in the “Track” mode setting of the Integrated Dynamics System. Disabling VSA requires that the driver first select Track mode, which requires a deliberate, five-second holding of the Dynamic Mode dial, after which the driver must depress the VSA button on the left side of the instrument panel for an additional six seconds. Shutting off and restarting the vehicle will return the system to its default setting, with the VSA enabled.

Anti-Lock Braking System (ABS) with Electronic Brake Distribution (EBD) and Brake Assist

The superlative deceleration performance offered by the Acura NSX’s next-generation super sports brake system seamlessly melds both mechanical (friction) and regenerative braking systems for exceptional braking performance. Braking is further enhanced through a sports-oriented Anti-Lock Braking System (ABS) with Electronic Brake Distribution (EBD) and Brake Assist.

By varying the amount of force of a vehicle’s brakes at each individual wheel, Electronic Brake Distribution (EBD) acts as an extension of the ABS by applying the optimal amount of braking force at each wheel to maximize vehicle stability while optimizing stopping power.

As a further supplemental technology to the ABS and EBD, the Brake Assist system on the NSX provides an additional level of supplemental braking pressure when the driver attempts a hard or emergency stop.

Multi-Angle Rearview Camera with Dynamic Guidelines

When Reverse gear is selected, the convenient Multi-Angle Rearview Camera with Dynamic Guidelines automatically displays one of three different real-time views-Normal, Wide-Angle and Top-Down-behind the vehicle on the Display Audio screen, allowing the driver to more precisely navigate when backing up. The driver can choose whether to display dynamic guidelines (lines that articulate with movement of the steering wheel to show the arc the vehicle will travel while backing up), fixed guidelines or no guidelines at all. The dynamic and fixed guidelines settings help indicate the clearance required while maneuvering.

• Normal View – helpful for surveying the area directly behind the vehicle while backing up or parking
• Wide-Angle View – displays a nearly 180 degree perspective behind the NSX, perfect when backing out of a parking spot where it is difficult to see cross traffic or when parked between two tall vehicles
• Top-Down View – offers a highly-detailed and close-up view immediately behind the vehicle, ideal for backing into tight confines

If the last view mode used was Normal or Wide-Angle, that same mode will appear the next time the Reverse gear is selected. If Top-Down View was last used, it will revert to Wide-Angle View when used next.

Tire Pressure Monitoring System (TPMS) with Location and Pressure Indicators

Every Acura NSX includes an onboard Tire Pressure Monitoring System (TPMS) with Location and Pressure Indicators that display the current tire pressure in pounds per square inch (psi) of each individual tire in a visual graphic shown on the center gauge cluster (in the Multi-Information Display)-an important safety feature for an ultra-high-performance supercar such as the new Acura NSX.

Of note, the TPMS has different warning thresholds for both low- and high-speed operation, as track driving requires an elevated tire pressure.

LED Daytime Running Lights (DRL)

The Acura NSX’s LED daytime running lights (DRL) offer improved safety when driving the vehicle during daylight hours by allowing the vehicle to be seen earlier and more conspicuously by other drivers/pedestrians on the road.

Front and Rear Parking Sensors

Available with the optional Technology Package, a front and rear parking sensor system, located on the outer front and rear perimeter of the vehicle, can alert the driver to an approaching obstacle. The parking sensors function in both Reverse as well as with forward vehicle motion at low speeds.